Home |
linear winding
|
Controllers
The controller of the Linear Winder is a sturdy industrial CN-Control, with a RUFF developed Software.The winding programs will be created in winding steps. The controller can handle csv-files, so for example, very long programs can be written in Excel and load it in the machine.A network connection of the machine to a computer is also possible, for send and up load of
winding programs.All RUFF Linear Winders have the same controller, this has the advantage: one operator can handle all machine sizes from small bench top model up to heavy duty floor winder. Further the machine has 5 free programmable out-/ inputs for external devices if needed for your application, these can be activated or deactivated in each sequence.
N.C. IPC EL870
Industrial-PC
Ruff dedicated software
| (Fan-less) |
| Operating panel |
8" Touchpanel with 4 Function buttons, 640x480 pix |
| Processor |
Mobile Intel Celeron M 600 MHz |
| Working memory |
256MB |
| System |
Windows CE 5.0 |
| Memory |
Compact Flash 64MB - 2GB |
| Interfaces |
Front USB- socket (1-fold), Rear (3-fold), Ethernet-Interface 1x10/100 Mbit, RJ45, PS/2-Interface, Serial Interface, PCI Modul Card: MC-CAN Dual Can Controller |
|
| Hand control unit |
| Language |
Unitext (all characters possible. i.E. z.B. Cyrillic, Chinese, Israeli etc.) |
| Keypad |
With 3 additional Function buttons, defineable for options as per customers request |
|
| Additional functions |
| Winding program |
Modular Setup which means, Winding and Index drive etc. can be programmed seperate and independent
Modules can be copied and easily changed. Max 100 Modules |
| Winding methodes |
Continous, Reverse, Segment, Progressive Automatic Winding program set up |
| Program / Data management |
Programs are saved in CSV-Format. Therefore programs can be made externely. Own data management (with access authorisation) Programs can be saved onto USB-Stick, or onto the CF-Card in a seperate file. The central program management on an external PC (Server) is possible via Ethernet. Programs to be safed onto CF-Card. Easy file structure management. Every program can be reported with a text description. |
| Service |
Remote control (Ftp- connection) possible. Teleservice via Remote desktopconnection(Ftp- connection) for troubleshooting in the logicprogram.Update of PLC- and visual display software via USB-Stick. Datas canbe sent via E-mail. Converter parameters for winding head- and Roller tabledrive can be edit from touch panel.
(I.E. changement of rule parameters by bad power supply) |
|
N.C. Siax 100
Ruff dedicated software
| (Fan-less) |
| Operating panel |
10.4" Touchpanel LCD TFT 65000 Colors |
| Resolution |
640x480 |
| Interfaces |
2 Serial lines (1 rs232/422), 2 USB Ethernet 10/100 (RJ45), Front USB-socket |
| Language |
UTF8 code (all characters possible. iE,zB, Cyrillic, Chinese, Israel, etc) |
| Protection's |
IP65 frontal |
| Inputs |
Until 128 |
| Outputs |
Until 128 |
| Modem |
Remote control by internet |
| Interpolation |
Linear / Circular |
| Can open |
2 Can open lines: to control the motors and the I/O group |
|
N.C. Siax 80
Ruff dedicated software
| (Fan-less) |
| Operating panel |
5.7" Touch screen display LCD STN ¼ VGA B/W |
| Interpolation |
Linear and circular |
| Increm. encoder |
5/12 V Push Pull/Line driver 450KHz |
| Inputs |
16 |
| Outputs |
16 |
| Modem |
Remote control by internet |
| Analogic output |
12 bit +/- 10V |
| Protection |
IP65 |
| Serial lines |
2 line RS232, Front USB-socket (optional) |
| Can open |
1 Can open line to control the motors |
| Analogic inputs |
2x12 bit 5 V |
|
N.C. Siax 110I
Ruff dedicated software
| (Fan-less) |
| Operating panel |
LCD 4x20 - LED - Keyboard 41 buttons |
| Interpolation |
Linear and circular |
| Modem |
Remote control by internet |
| Increm. encoders |
1:2 - 5/12 V Push Pull/Line driver 200KHz |
| Inputs |
16 |
| Outputs |
16 |
| 2 Analogic inputs |
2x12 bit 0:5V |
| Analogic outputs |
2x12 bit +/- 10V |
| Protection |
IP65 |
| Serial lines |
2 lines RS232 |
|
